Delta economical safety belt 506101 fall protection full body safety belt



Deta 506101 economical anti falling suit single hook shock absorption



According to en355 and en361



Color: Orange



Net weight: 1800g



Economical anti falling suit, economical safety belt har11 (501011) and single hook damping belt an209cd (504209) are sewn together, which is convenient for management and use.



Delta 506102 comfortable fall proof suit safety belt double hook shock absorption belt



According to: en355, en361, en362



Model: enkit02



Color: Orange



Net weight: 2500g



Comfortable anti falling suit is composed of har14 (501014) with positioning belt and an219cdd (504210) double hook shock absorption belt.



Three elements of fall protection: full body safety belt, fall brake system, fixed point and connector



1. Fall protection full body safety belt



The main function of the safety belt is to decompose and transfer the force and energy generated when falling, so as to protect the safety of human body. Full body safety belt is a product suitable for fall arrest. Select the appropriate safety belt according to the type of work and environment. According to en361, the bearing capacity of the metal hanging point on the back of the safety belt should be 15kn and maintained for 3 minutes.



2. Fall brake system



Fall brake system, also known as anti falling brake, is the middle hub connecting the fall protection whole body safety belt with the fixed point or connecting piece (sling, lifeline, etc.). It can be divided into guide type, shock absorption type, self-locking speed difference type, etc. When selecting the product, the possible falling height must be calculated according to the working environment to confirm the required anti falling system.



3. Fixing points and connectors



The fixed point (connecting flat belt, rod, tripod, etc.) is the stress point of the whole fall protection system. According to the standard of fixed anchor point (en795-2012), the bearing capacity must be greater than 12kn (for each additional person)



Add 1kn) and maintain for 3 minutes. It should be located at a high place as far as possible to avoid collision with the ground or low-rise structure when workers fall.



The connector (hook, large diameter safety hook, etc.) is the component connecting the connection system and the suspension point. According to en362 standard, the bearing capacity should be 20KN and maintained for 3 minutes.