Product
Current Location:Home > Product
DElta501014双点 安全带
Delta 501014 fall protection belt ha054 is equipped with ex076 positioning belt;

It is equipped with hot pressed back support with Terry lining and 2 side buckle rings;

Double hanging point safety belt, with chest and back double hanging points, orange and black two sides are easy to identify, wear positive and negative;

According to en358 and en361 standards.

Model: 501014

Material: striped red polyester, Terry lining

Color: Red / blue

Function: Fall Prevention

Scope of application: work at height

Ha054 full body safety belt with ex076 positioning belt, hot pressed back support, Terry lining and 2 side buckle rings. According to en358 and en361 standards.



Material: tape: Red polyester, Terry lining



Instructions: the safety belt is recommended for various types of high-altitude work (scaffold, roof, glass ceiling and wall, car, bridge), simple work or short-time work. The safety belt should be close to the body as much as possible, but it should not affect the user's free movement. The chest buckle must be fully buckled to ensure that the user can be protected in case of falling accident, and irregular falling can be reduced as much as possible.



Prohibited: please do not use the product outside the scope specified above. In case of doubt about the firmness of the equipment, please replace the equipment in time. In case of falling, please send the product to the manufacturer or its authorized professional for inspection. The product is tested every 12 months by the manufacturer or its authorized professionals. The whole body safety belt and a safety rope can not constitute a complete fall prevention system.



Storage instructions: the safety belt must be stored in a dry and ventilated area to avoid sunlight and rodent.



Cleaning / maintenance instructions: wash with a brush dipped in water and detergent. Then dry it with a dry cloth and put it in a ventilated place. Wipe the metal parts with a cloth soaked in Vaseline. Be sure to check the equipment before use. In particular, avoid the following situations:



Band: no cracks, burns, rust, or abnormal narrowing



Sewing: no visible surface damage.



Metal parts: no signs of oxidation and deformation.



Make sure that the other parts such as the spring hook are in good condition.