[product name]: sborean safety shoes (Bacou)



[model]: 702



[function]: prevent electric shock, insulate and protect toes



High quality imported leather upper, leather thickness 1.8 mm to 2.0 mm



2010 new and improved, improve comfort



Remove the metal eyelet to make it safer (especially the electrical insulation safety shoes 702)



Unclosed tongue for enhanced breathability



Double density PU sole, excellent grip, in line with European anti slip standard Src



Conform to the national standard of



1、 Features and scope of application:

1. The characteristics of safety shoes against smashing are to prevent impact or crush by heavy objects and protect toes

Scope of application: it is suitable for construction, fire protection, mining, forestry, loading and unloading, port, quarrying, machinery and other industries



2、 Main test data:

1. Safety performance test of finished shoes; the test item standard requires that the deformation clearance in the toe of impact resistant shoes ≥ 15mm is qualified, and the deformation clearance in the toe of pressure resistant shoes ≥ 15mm is qualified

2. Mechanical and physical property test of finished shoes: the test item standard requires the measured results: the thickness of the sole at any part of the sole is not less than 4mm; left: qualified; right: qualified; wear resistance (abrasion length mm) ≤ 10mm; qualified folding resistance (40000 times of crack length mm) ≤ 12mm; qualified peeling strength ≥ 59N / cm



3、 Function introduction



1. Anti smashing (applicable to workplaces with falling objects, impact, etc.): the standard number is gb21148-2007



2. Anti puncture (applicable to the workplace with sharp objects on the ground): the standard number is gb21148-2007



3. Anti static (applicable to workplaces requiring to prevent accumulation of static electricity): Executive Standard No. gb21148-2007



4. Electrical insulation (applicable to the workplace to prevent electric shock during live working): the Standard No. of GB 2011-2009 (6kV)



5. Standard for sliding resistance gb21148-2007



6. Anti skid (applicable to wet ground workplace), Executive Standard No.: gb21148-2007



4、 Precautions for wearing and using:



1. When wearing anti smashing safety shoes, they can only be used within the specified range of impact resistance and pressure resistance, and can only be used as auxiliary safety appliances;

2. When wearing anti smashing safety shoes, try to avoid contact with sharp tools. After obvious deformation of inner head caused by heavy pressure or heavy smashing, it can not be used as safety shoes again;

3. The anti smashing safety shoes can be worn in the range of - 25 ℃ to + 55 ℃



4. Anti smashing safety shoes should be more than 20cm above the ground when stored in the warehouse, and 1m away from all heating experience. It is strictly forbidden to store them in the same room with acid-base or other corrosive products. The warehouse should be dry and ventilated to prevent damp and mildew