PROPERTIES: PET high temperature adhesive tape is made of soft PET polyester film and high performance silicone pressure sensitive adhesive coated on one side. It is mainly used for high temperature environment work surface treatment shielding protection, electroplating, electrophoresis, ultra-high temperature baking paint, powder spraying and chip components terminal electrode use, etc. , high Adhesion, no residue of tear and solvent resistance. USES: 1, mainly applicable to computer chassis, cabinets and other metal surface treatment of high-temperature powder not sprayed, paint shielding protection; 2, at the same time applies to electronic products, automotive industry, painting and other products when the high-temperature spraying shielding protection and insulation; 3, printed circuit boards, electronic parts, resistors and capacitors fixed in production and PCB immersion process shielding gold finger parts and to prevent immersion and pollution of plating solution, PCB gold shielding protection; 4, home appliances, machinery, electronics and other industries need high-temperature coating spray paint protection, high-temperature binding fixed. 5, release paper joints use (also known as: Transfer tape) specification: Length: 33m / 66m / customizable meters thickness: 0.05mm / 0.06mm / 0.08mm width: 2mm-980mm notice: 1, when using, note that there is no oil, powder, dust, or other release agent on the surface of the paste. 2, the use of this tape in the material containing plasticizer, viscosity will be affected, pay attention to detection when using. 3. Store below 25 °C, 65% relative humidity, in a dry environment; avoid direct sunlight and high temperature (above 40 °c) , high humidity (75% RH) ; storage period: 6 months. WARM TIPS: 1, products can be based on the special needs of customers, for a variety of thickness and viscosity and anti-static treatment, die-cutting processing. The temperature tolerance values provided for each material are for reference only and will vary depending on the application, method of use, and time of exposure to a given temperature. For your particular application, please ask for samples to evaluate whether the product meets the requirements.
